How To Remove A Pop Socket?

by Rudresh Ratnaparkhe
How To Remove A Pop Socket

Are you searching for a method for how to remove a pop socket as you don’t think it is in the right position? Then do not worry about damaging your thing while removing the pop socket. Here I will tell you all the important steps that you should do while removing the pop socket. In this article, I will explain what you should do while taking the pop socket out of your phone. You will come to know about the correct way to remove the pop socket here. So let us discuss today how to remove a pop socket.

How To Remove A Pop Socket?

Here is a common way that you should know how to remove a pop socket properly. Let’s see what steps you need to do in the following.

  1. Hold the device tightly in your hand first.
  2. Now make the pop socket flat by collapsing it.
  3. Place your thumb on the pop socket.
  4. Try to pull the socket out of the device slowly from one side. 
  5. Use the nails to go under the sticky part of the pop socket.
  6. Now gently remove the pop socket out of the device.
  7. Try to slide the pop socket a little until it releases out.

Remove A Pop Socket From Mobile Phone Case

I have mentioned steps for how to remove a pop socket off a phone case in the following. You will be able to easily remove the pop socket.

  1. Catch your phone firmly in your hand.
  2. Collapse the pop socket to make it flat.
  3. Keep your thumb on the pop socket accessory.
  4. Pull the socket slowly out of the phone case from one side.
  5. Insert the nails into the adhesive portion of the pop socket.
  6. Now carefully remove the pop socket from the phone case.
  7. Slide the pop socket a bit for removing it carefully.

Remove A Pop Socket Mount

Below is the method for how to removal of the pop socket mount. Let us see that how to remove a pop socket holder from the place where it is mounted.

  1. Take a tight grip on your device.
  2. To remove the pop socket first collapse it.
  3. Maintain your grip on the pop socket and mount.
  4. Slowly pull the socket out of the device from one side.
  5. Insert the nails into the pop socket’s adhesive section.
  6. Remove the pop socket from the mount case with caution.
  7. Push the pop socket a little and gently slide it to remove it.

Remove A Popsocket Plate

If your pop socket is broken and only the sticking plate is left behind. Here are the steps to how to remove the pop socket plate that you should know.

  1. Properly hold the phone.
  2. Now use your nails to go under the pop socket plate.
  3. Try to pull the plate out slowly from one side.
  4. Peel the plate properly.

If you do not have nails then you can use the dental floss thread to go under the plate and repeat the same procedure as above.

Remove Popsocket Adhesive

There are some ways for how to remove pop socket glue from the surface of the device.

  1. Catch your phone firmly in your hand.
  2. Collapse the pop socket to make it flat.
  3. Keep your thumb on the pop socket accessory.
  4. Pull the socket slowly out of the phone case from one side.
  5. Insert the nails into the adhesive portion of the pop socket.
  6. Now carefully remove the pop socket from the phone case.
  7. Slide the pop socket a bit for removing it carefully.
  8. Use a cotton swab or a clean microfiber cloth.
  9. Take some rubbing alcohol.
  10. Soak the cloth in it.
  11. Now rub slowly on the adhesive.
  12. Wipe the glue adhesive when it becomes soft.

Remove Popsocket From Otterbox Case

The different steps that you will need to remove the pop socket from Otterbox. It is easy to get the pop socket out of the Otterbox case as they are specially designed.

  1. Take a firm hold of your mobile.
  2. Now remove the otter box phone case.
  3. Remove the layer of the case where the pop socket is mounted.
  4. Flat the pop socket.
  5. Keep the mount on the floor holding it still.
  6. Pull the socket slowly out of the mount from one side.
  7. Insert the nails into the adhesive portion of the pop socket.
  8. Take care when removing the pop socket from the mount case.
  9. Softly push to remove the pop socket out, and slip it.

How To Reattach Popsocket To Base?

If you have placed the pop socket at an incorrect position then do not worry about it. I will tell you a way how you can place it back to the correct place wherever you want.

  1. Catch your phone firmly in your hand.
  2. Collapse the pop socket to make it flat.
  3. Keep your thumb on the pop socket accessory.
  4. Pull the socket slowly out of the phone case from one side.
  5. Insert the nails into the adhesive portion of the pop socket.
  6. Now carefully remove the pop socket from the phone case.
  7. Slide the pop socket a bit for removing it carefully.
  8. Now dip the pop socket in cold water for 3 seconds.
  9. Dry it for at least 10 minutes.
  10. Wipe the pop socket once before sticking it back.
  11. Decide the place or the base where you want to fix the pop socket.
  12. Reattach it to the device or the flat surface.
  13. Keep it unused for at least one hour so that it gets fixed properly.

How To Change Popsocket On Popwallet?

You can change the pop socket that is attached to a pop wallet as per following the steps given below. This will also help you in how to remove the pop socket wallet.

  1. Take out the pop wallet from your phone which is attached to the pop socket.
  2. Remove the things like cards out of the pop wallet.
  3. Make the pop socket flat.
  4. Hold the pop wallet on the plain surface.
  5. Pull the socket out of it slowly from one side.
  6. Insert the nails into the pop socket’s adhesive section.
  7. When extracting the pop socket from the pop wallet make sure that you do not damage the pop wallet accessory.

How To Clean A Popsocket?

The method for cleaning the pop socket is given in the following. Please read it carefully so that you will understand the procedure.

  1. After removal of the pop socket.
  2. Dip the pop socket in cold water for 3 seconds.
  3. Then dry it for at least 10 minutes.
  4. Take a clean microfiber cloth.
  5. Wipe the pop socket to clean the water if remaining.
  6. You can reattach it to the device or the flat surface.
  7. Do not use the pop socket for at least one hour after fixing it.

Read Also: What Is A Distributed Network?

FAQ

Can You Remove And Reuse A PopSocket?

Yes, you can remove and reuse a Popsocket. Here is the process that you can do for removing and reattaching the pop socket.

  1. Hold your phone tightly in your hand.
  2. Collapse the pop socket to make it flat.
  3. Keep your thumb on the pop socket accessory.
  4. Pull the socket slowly out of the phone case from one side.
  5. Insert the nails into the adhesive portion of the pop socket.
  6. Now carefully remove the pop socket from the phone case.
  7. Slide the pop socket a bit for removing it carefully.
  8. Now dip the pop socket in cold water for 3 seconds.
  9. Dry it for at least 10 minutes.
  10. Wipe the pop socket once before sticking it back.
  11. Decide the place or the base where you want to fix the pop socket.
  12. Reattach it to the device or the flat surface.
  13. Keep it unused for at least one hour so that it gets fixed properly.

Do Pop Sockets Come Off?

Yes, pop sockets can come off. The reasons for pop sockets can come off are as follows.

  • If the pop socket is not placed on the flat surface.
  • The glue or the adhesive is not sticky anymore.
  • If any chemical or water has gone between the pop socket and the surface where it is mounted.

What Is The Size Of A Popsocket?

The general size of the pop socket you use is about 1.56 inches in diameter. The pop socket can be rise to a height of 0.25 inches. However, it can vary as per the model of the pop socket.

Can You Remove A Pop Socket And Put It On Another Case?

Yes, you can remove a pop socket and put it on another case. To do so you can follow the steps given in the following.

  1. Take a tight grip on your device.
  2. To remove the pop socket first collapse it.
  3. Maintain your grip on the pop socket and mount.
  4. Slowly pull the socket out of the device from one side.
  5. Insert the nails into the pop socket’s adhesive section.
  6. Remove the pop socket from the mount case with caution.
  7. Push the pop socket a little and gently slide it to remove it.
  8. Now dip the pop socket in cold water for 3 seconds.
  9. Dry it for at least 10 minutes.
  10. Wipe the pop socket once before sticking it back.
  11. Decide the place or the base where you want to fix the pop socket.
  12. Reattach it to the flat surface of another case.
  13. Keep it unused for at least one hour so that it gets fixed properly.

Read Also: What Is Binary Format?

Conclusion

Above we read how to remove a pop socket steps in detail. Here you came to know that what are the ways that will help you in removing the pop socket properly. I told you about the careful things that you will need to do while removing the popping socket from different surfaces. You understood the removing and cleaning of the pop socket in this article. The information on how to remove a pop socket from the phone case was explained by me was helpful. So now you have completely understood every important point for how to remove a pop socket.

Related Articles

Leave a Comment